...

チタン粉末焼結フィルターエレメント

チタン粉末焼結フィルターエレメント

Titanium powder sintered filter element (tube type, plate type) is made of industrial high-purity titanium powder (99.4%) as raw material, after screening, cold isostatic pressing, high temperature and vacuum sintering. Titanium powder filter element has unique excellent performance due to its high-tech material composition and special molding process. Titanium powder filter element made of irregular powder of high-purity titanium or titanium alloy is mainly used in separation and filtration in petrochemical, liquid medicine manufacturing, water treatment and other industries.

チタン粉末焼結フィルターエレメント
チタン粉末焼結フィルターエレメント

技術パラメーター

フィルタリング精度

0.2--100um

直径

30mm, 50mm, 60mm, 70mm, etc.

インターフェース形式

Flat type, socket type (222 type, 226 type), thread M20/M30/M42/M48 (can be customized)

注:上記のパラメータは、作業条件に応じて最適化およびカスタマイズすることができます。.

製品の特徴と利点

No particles falling off, no pollution of the drug solution, in line with food hygiene and pharmaceutical GMP requirements.
High temperature resistance (300 ℃ wet state), generally can be used below 280 ° normal.
Low differential pressure, small footprint, large flow rate, 0.2 MPa can reach the maximum flow rate.
Good mechanical properties, can be pressed and pumped, easy to operate.
Mechanical strength, high precision, good molding process, the overall length of the non-welded up to 1000 mm.
Good chemical stability, acid resistance, alkali resistance, can be used in a wide range of PH value, strong oxidation resistance, suitable for a variety of environments.
Uniform structure, narrow pore size distribution, high separation efficiency
High pore size filtration, low filtration resistance, high permeability efficiency.
Strong anti-microbial ability, does not interact with microorganisms, and can be used in bioengineering and medical fields.
Renewable, easy to clean, long service life, generally several times the ordinary membrane cartridge, normal use of more than two years.

製品応用産業

Decarburization filtration in the process of concentrated preparation of I.V. solution, small injection, eye drops, oral solution and security filtration before terminal filtration in the process of diluted preparation in the pharmaceutical industry.
Impurity removal filtration, decarburization filtration and fine filtration of materials in the production process of raw material plants.
Security filtration of ultrafiltration, RO, EDI system, filtration after ozone sterilization and ozone aeration in water treatment industry.
Clarification and filtration of beverage, liquor, beer, vegetable oil, mineral water, soy sauce and vinegar in food and beverage industry.
Decarburization filtration and precision filtration of liquid products, liquid raw materials, pharmaceutical intermediates in chemical industry, filtration and recovery of ultra-fine crystals and catalysts, precision filtration after resin adsorption and filtration after systematic heat-conducting oil and material removal, and purification of catalytic gases.
Oilfield water filtration and security filtration before reverse osmosis in the field of seawater desalination.
High-temperature decarburization and desiccant filtration in fuel industry.
Steam, compressed air and catalyst filtration in gas purification.

チタン粉末焼結フィルターエレメント

どのように焼結フィルターを製造し、品質管理を行うのですか?

原料

原料

LianDaFiltrationは、常に均一な原料粉末を選択することにこだわり、将来的に大きな孔径、高い引張強度、温度安定性を備えた各焼結フィルターを製造します。.

粉体充填

粉体充填

均一な粉末密度を達成し、孔欠陥を除去するために、静水圧プレス充填プロセスが使用される。.

高い焼結性

高い焼結性

真空アルゴン保護下での高温焼結により、マイクロポア接続の気密性が向上し、耐圧性が高まります。.

CNC加工

CNC加工

CNC旋盤加工と研削加工により、フィルターエレメントの幾何学的精度は±0.02mmに保たれ、高精度の濾過要件を満たしている。.

溶接

溶接

レーザー溶接された接合部は繊細かつ滑らかで、漏れの心配がないため、フィルターの密閉信頼性が向上する。.

寸法

寸法

LianDaFiltration圧力計と高効率寸法監視装置を使用して、焼結フィルターのすべての寸法をチェックします。.

フィルターテスト

フィルターテスト

微小孔遮断率評価と圧力破裂試験により、各フィルターエレメントが一度に品質検査に合格することを確認する。.

製品パッケージ

製品パッケージ

LianDaFiltration すべての焼結フィルター製品と付属品は、国際標準の安全手順に従って梱包され、基準を満たしています、,

以上の8つの工程と厳格なテストを通じて、LiandaFiltrationは安定で信頼できる焼結フィルター製品を提供します。.

よくあるご質問

High levels of suspended solids or viscous media can accumulate in the pores. We recommend using a pre-filter or reducing inlet concentration.

We recommend online high-pressure backwashing (3–5 bar) or chemical cleaning (alkaline or acid wash). Avoid ultrasonic cleaning, as it can damage the microstructure.

Titanium itself is highly corrosion-resistant, but surface deposits can build up. Regular cleaning and periodic passivation will help maintain performance.

Titanium cartridges are lighter and more corrosion-resistant than stainless steel but come at a higher cost. They’re ideal for highly corrosive or high-temperature applications.

Make sure O-rings or gaskets are clean and undamaged, apply even torque, and avoid metal-to-metal contact that could scratch the cartridge surface.

お問い合わせ
その他の製品
工業用フィルター

フィルター

金網デミスターパッド

金網デミスターパッド

構造化梱包

金網パッキング

タワー内部

タワー内部